Assembly Of The Safety Net - Klarfit Jumpstarter Mode D'emploi

ASSEMBLY OF THE SAFETY NET

An overview of the required individual parts of the safety net (marked A – I)
can be found in the previous section "Individual parts of the safety net".
Note: Two adults in good physical condition are required for the following
assembly. For your safety, you should wear proper shoes and clothing,
Failure to follow these instructions and warning may result in injury.
NOTE: The following pictures show the installation of the safety net.
Equipment and appearance may vary slightly depending on the model.
Use the quick clamp to secure the lower rod to the trampoline stand as
shown. Tighten the screws using the spanner.
1
Place all individual parts in
front of you before assembly.
The construction of the safety
net should be carried out by
two persons.
Start by assembling the poles.
2
EN
37