Safety Instructions - Klarstein BELLA PICO 2G Mode D'emploi

EN
12

SAFETY INSTRUCTIONS

• Before use, check the voltage on the device badge and connect the device only to
sockets which correspond to the voltage of the device. If you are not sure whether
your connections meet the requirements, consult an electrician or your power
supplier.
• Always turn the motor off before plugging the motor into an electrical outlet.
• To prevent electric shock, never completely immerse the base in water or other
liquids.
• If the power cord is damaged, it must be replaced by the manufacturer, an
authorized service center, or a similarly qualified person.
• Do not bend the power cord or allow it to hang over the work surface to prevent it
from getting caught.
• Do not place the appliance near open stoves, hot ovens, or easily flammable
materials such as curtains or textiles.
• Before use, place the appliance on a stable, level surface.
• Children 8 years of age and older, mentally, sensory and physically impaired
persons may only use the device if they have been thoroughly familiarized with
its functions and safety precautions by a supervisor responsible for them and
understand the associated risks.
• Ensure that children do not play with the device.
• Place the device as close as possible to the power source so that you can pull the
plug quickly and easily if necessary.
• Check the power cord regularly for damage. Do not use the unit with the power
cord damaged.
• Only use the unit indoors and for the specified purpose.
• Keep children away from the unit and stow it out of the reach of children.
• Do not use the device without contents and only under supervision.
• Do not touch any moving parts with your hands during use.
• Keep the operating instructions and pass on the device only with the operating
instructions.
• Only use original accessories.
• Unplug the appliance from the wall outlet before cleaning or discontinuing use.
• Switch off the appliance and disconnect the plug before changing or removing any
moving parts.
• The unit contains parts that are not accessible to the user. Do not remove any covers
and do not attempt to repair the unit yourself. Repairs may only be carried out by
qualified specialists.
• Do not connect the unit to multiple sockets, external timers or remotely controlled
sockets.
Note: The device is only designed for short-term operation, i.e. it should not be
operated continuously for more than 4 minutes. Then switch off the unit and let the
motor cool down before switching it on again.