Axis Communications M1145 Serie Guide D'installation page 18

AXIS M1145 Series
Click the < or > button to move the focus position one step.
Click the << or>> button to move the focus position in
multiple steps.
4. When satisfied, click Enable iris to enable the iris.
Access the Product
AXIS IP Utility and AXIS Camera Management are recommended methods
for finding Axis products on the network and assigning them IP addresses
in Windows®. Both applications are free and can be downloaded from
www.axis.com/techsup
The product can be used with most operating systems and browsers. The
recommended browsers are
• Internet Explorer
• Safari
• Chrome
For more information about using the product, see the User Manual
available at www.axis.com
Reset to Factory Default Settings
Important
Reset to factory default should be used with caution. A reset to
factory default will reset all settings, including the IP address,
to the factory default values.
Note
The installation and management software tools are available
from the support pages on www.axis.com/techsup
To reset the product to the factory default settings:
1. Disconnect power from the product.
®
with Windows
® ®
with OS X
TM ®
or Firefox with other operating systems.
®
18