ecofort ecoQ CleanAir 800 Manuel D'emploi page 58

Operating instructions
"WiFi" Button
After turning on the purifier, the Wi-Fi button light is off,
long press the button for 3 seconds to start the Wi-Fi
network connection. After the network is configured
successfully, the indicator light of the Wi-Fi button will
be lit in steady green. Press the button for 3 seconds and
network connecting process will be restarted. The green
light of the Wi-Fi button indicator will flash for 1 minute.
If the connecting fails within 1 to 2 minutes, the button
indicator will turn off.
"Sleep" Button
Press this button in working state to enter the SLEEP
MODE, the item runs at the lowest speed level. When
Sleep mode is active, the Timer function is still effective.
Press any button and the unit will exit the SLEEP MODE and
return to the normal working mode.
56 | User Manual ecoQ CleanAir 800
Filter replacement reset buttons,
press "SPEED" + "AUTO" together 3s
When the filter has been used for a certain period of
time, the "POWER" button indicator light will flash and
the buzzer will sound an alarm to remind the user that
the filter should be replaced. Press "SPEED" + "AUTO"
buttons together for 3 seconds to reset the reminder. The
"POWER" button light stops flashing and the buzzer stops
alarming.
Before the end of the filter lifespan has arrived, the
reminder will not be reset when the filter resetting is
applied.
In order to clear the filter running time (reset the timer at
any point), the "SPEED" + "AUTO" buttons must be pressed
for more than 10 seconds.
Tilting & Overturning Protection
On working state, the item will automatically stop
working when being tilted a certain degree or taking off
the left or right side covers.
During this protection state, all indicator lights are off.
As soon as the Air Purifier is placed correctly, the unit
will return to normal working condition.