Chauvet DJ INTIMIDATOR SPOT 455Z IRC Mode D'emploi page 4

Intimidator Spot 455Z IRC QRG
Overview
(cont.)
AC Power
Fuse
Replacement
Full Color
LCD Display
Control Buttons
Fuse Holder
Power In
This product has an auto-ranging power supply that can work with an input
voltage range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
1. Disconnect the product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder and pull
straight out.
3. Remove the blown fuse from the holder and replace with a fuse of the
exact same type and rating.
4. Re-insert the fuse holder and reconnect power.
IR Sensor
Power Out
DMX Out
DMX In
4
Indicator
Light
Front Panel View
Rear Panel View
EN