Microphone Stand Installation - Panasonic WX-SA250P Mode D'emploi

■ Microphone stand installation

⿟ When installing the antenna on a microphone stand, place it higher than
Important
1 m (39-3/8 inches) from the floor, also make sure that it has an
unobstructed line-of-sight to the microphone. Placing the antenna at a
low place could reduce the range it can cover. In particular, people,
metal products, and pieces of furniture placed between the antenna and
the microphone may block the radio waves interfering with the
transmission, resulting in audio dropouts.
⿟ Carefully route the cables so that they do not accidentally trip the
microphone stand.
Unplug all cables from the antenna and follow these installation procedures.
1
Install the antenna
Open the cover on the microphone stand installation hole and insert the microphone
stand screw in the hole. Use a microphone stand with an installation screw which is
either PF1/2 or W3/8. If the installation screw on the microphone stand is W3/8, use
the included conversion screw.
2
Connect the cable to the antenna
Connect the LAN cable (page 16) to the antenna. See "Connections" (page 24)
for details on connecting the cable.
LAN cable
Antenna
Mounting screw
(PF1/2 or W3/8)
Microphone stand
(locally procured)
23