Kohler CB-CLC2026FS Mode D'emploi page 2

Care and Cleaning
For best results, keep the following in mind when caring for your
KOHLER product:
Wood Surfaces
• As with any smooth surface, avoid using abrasive cleaners as
they will scratch the surface. Wipe the wood surface regularly to
prevent buildup of soap and scum.
• To protect against scratches, use felt, leather, or cork under all
items placed on the wood surface. Do not expose wood furniture
to direct sunlight, drying heat sources, or dampness.
• Dust frequently with a soft cloth in the direction of the grain. Use
only products specifically made for cleaning wood. Avoid using
oily polishes or waxes, or products containing silicone. Blot spills
immediately with a soft, damp cloth.
• Every six months remove soil buildup by rubbing with a soft
cloth dampened in a 50/50 solution of warm water and an
ammonia-free detergent. Wipe clean with a cloth dampened in
warm water and then wipe dry.
• Paint pens and touch-up markers are available to conceal
scratches on the wood surface. These products may be purchased
from a Kohler distributor or call 1-800-4-KOHLER for ordering
information.
Glass, Metal, and Mirrored Surfaces
• Use a mild detergent such as liquid dishwashing soap and warm
water for cleaning. Do not use abrasive cleaners that may scratch
or dull the surface.
• Carefully read the cleaner product label to ensure the cleaner is
safe for use on the material.
• Always test your cleaning solution on an inconspicuous area
before applying to the entire surface.
• Do not allow cleaners to sit or soak on the surface.
• Wipe surfaces clean and rinse completely with water immediately
after cleaner application. Rinse and dry any overspray that lands
on nearby surfaces.
• Use a soft, dampened sponge or cloth. Never use an abrasive
material such as a brush or scouring pad to clean surfaces.
1048842-5-C 2 Kohler Co.