Byron BAY PILATES Reformer Pilates avec Trapeze Complet Manuel De Montage page 9

12. The toolki t contains two pulleys wi t h black knobs. Unscrew the black knobs.
13. Remove the large washer and insert the screw on the pulley through the slot of the elevator. Put
the washer on back of the elevator and then screw the black knob back on. Do the same wi t h
both elevators, making sure that the pulleys face the cart.
14. You can raise or lower the pulleys by loosening the black knob and sliding the pulley upwards or
downwards through the slot.
15. Next, connect at least one spring from the cart to the spring bar to stabi l ize the cart.
16. Then bring the free ends of the strings back to the cart and insert them through the fi r st chrome
eyelet, then into the locking anchors (cleats) and finally into the second chrome eyelet. Pull both
strings unti l you feel the same resistance. You can adjust the length of string to different exercise
requi r ements by losing or locking i t at the cleats.
17. Screw on the shoulder pads, and adjust the head rest to your desi r ed height.