Klarstein NORDERNEY Mode D'emploi page 25

Free heating mode
Free heating mode provides three additional heating functions:
Comfort
Economy
Frost-free
Note: When the ambient temperature is equal to the set temperature use the
up and down keys to toggle between Economy and Frost-free function.
Programmed weekly heating mode
1. To enter the weekly heating mode press PROG and move the cursor over the
clock icon at the bottom left hand side of the LCD screen and press OK.
2. Now the cursor is fl ashing over the days of the week (left side of menu).
3. Use the UP and DOWN arrows to choose your day to program 1 to 7.
4. Press the PROG key to confi rm the day.
5. Use the OK arrows to select the heating function between Comfort, Economy
and Frost-free. You will see the cursor on the right side of the menu scroll
between the modes.
6. That is the fi rst 30 minute period selected and it moves on to the next 30
minute period.
7. Press the UP and DOWN arrow to choose the time.
8. Program each day of the week separately following the steps above.
Comfortable function is intended to heat the room to the set temperature.
To activate or deactivate Comfortable function, press the up or down key, if
activated icon
temperature is set to 35 °C, to adjust use the key
Economy function is intended to maintain the set temperature. When the
ambient temperature is equal to the set temperature, heater automatically
switches from Comfortable to Economy mode. When the ambient temperature
is 5 °C lower than the set temperature, heater automatically switches from
Economy to Comfortable mode.
Frost-free function is intended to keep the minimum temperature of 5 °C
inside the room (this temperature cannot be adjusted). This function is set as a
default function for free heating mode. It activated automatically after entering
the free heating mode.
appears on the LCD display. Default heating appears on the LCD display. Default heating
to set temperature.
EN
25