Wireless Connection: Wps Function - THOMSON DSC-353G Mode D'emploi

C - iNSTALLATiON
Important: To be confi gured for the EzLink function, your camera must use the default user name and
password. Reset your camera if necessary by pressing the "WPS/Reset" button at the back for at least 10
seconds.
• Then connect your smartphone or tablet to the WiFi network that your camera will use, then launch the
Thomview application.
Important note: Your camera is not compatible with 5 GHz wireless networks
(802.11ac WiFi network). Do not connect your smartphone or tablet to this type of network.
• Click on then
once read, your smartphone or tablet will ask you to enter the WiFi network key to which you are
connected, so that it can transmit to the camera.
2.2 - WIRELESS CoNNECTIoN: WPS FUNCTIoN
If your box or router has a WPS (WiFi Protected Setup) function, you can use the WPS/reset button on the
back of your camera for a quick connection to your WiFi network. Please refer to your modem/router/box
user guide to fi nd out whether you have the WPS feature and if so, how to use it.
8
en
camera
to scan the QRCode on the camera.
720P HD WiFi iP camera
Mains adapter