AUTO-HAK K31 Instructions De Montage page 5

Part list:
Towing hitch (without electrical set)
Cat. no. K 31
Class: A50-X
Designed for:
VOLKSWAGEN CADDY II
SEAT INCA
produced since 11.1995 till 12.2003
Approval number according to Directive 94/20/EC: e20*94/20*0209*00
This towing hitch is design according to rules of safety traffic regulations. The
towing hitch is a safety component and must be installed only by qualified
personnel. Any alteration or conversion to the towinh hitch is prohibited and
would lead to cancellation of design certification. Remove insulating compound
and underseal from vehicle (if present) in the area of the matting surfaces of the
towing hitch.
The vehicle manufacturer's specifications regarding trailer load and max. vertical
cup load are decisive for driving, and values for the towing hitch must not be
exceeded.
D-value formula:
Max trailer weight [kg] x
+
Max trailer weight [kg]
PPUH AUTO-HAK S.J.
Produkcja Haków Holowniczych
Henryk & Zbigniew Nejman
76-200 SŁUPSK ul. Słoneczna 16K
tel/fax (059) 8-414-414; 8-414-413
e-mail: office@autohak.com.pl
www. autohak.com.pl
Technical data:
D-value: 6,7 kN
maximum trailer weight: 1100 kg
maximum vertical cup load: 50 kg
Foreword
Max vehicle weight [kg]
9,81
=
X
1000
Max vehicle weight [kg]
D [kN]