Publicité
Les langues disponibles
Les langues disponibles
FITTING INSTRUCTION
4
A
8
3
12
2
This towing hitch is designed to assembly in following cars:
VOLKSWAGEN CADDY II, SEAT INCA both produced since 11.1995
till 12.2003, catalogue no. K31 and is prepared to tow trailers max total
weight 1100kg and max vertical load 50 kg.
Thank you for buying our product. Their reliability has been confirmed in
many tests. Reliability of towing hitches depends also on correct assembly and
right operation. For this reasons we kindly ask to read carefully this instruction
and apply to hints.
The towing hitch should be install in points described by a car producer.
Clamp mark
B
in acc. with
Cables joining
ISO
PN
1
L
Left directional lights
2
+
Rear fog lights
3
31
Ground
4
R
Right directional lights
5
58R
Right side parking lights
6
54
Stoplights
7
7
58L
Left side parking lights
7
B
1
A
6
5
8
From manufacturer
The instruction of the assembly
1. Take out a spare wheel.
2. Twist off bolts fastening bumper brackets.
3. Remove elongated, rubber plugs from left and right chassis
members. To raised holes put plates with nuts (pos. 4).
4. Put to chassis main bar of towbar (pos. 1) and fix through
holes pos. A using bolts M12x1,5x40mm (pos. 8) from
equipment.
5. Through holes (pos. B) and original holes fix using bolts
M12x40mm pos. 7 from equipment. Use plates with nuts
pos. 4.
6. Fix tow-ball (pos. 2) and socket plate (pos. 3) using bolts
M12x75mm (pos. 5) and M12x70mm (pos. 6).
7. Tighten all bolts according to the torque shown in the table.
8. Connect electric wires of 7-poles socket according to the
4
instruction of the car. (Recommend to make at authorized
service station)
9. Complete paint layer damaged during installation.
Torque settings for nuts and bolts (8,8):
M8
M12 85 Nm
After install the towing hitch you should get adequate note in registration
book (at authorised service station).The car should be equipped with:
• Indicators
• Tow mirrors
After 1000km check all bolts and nuts. The ball of towing hitch must be
always kept clear and conserve with a grease.
25 Nm
M10 55 Nm
M14 135 Nm
NOTE
Publicité
