Stopping Engine; Procedure - Yamaha Motor F8 Manuel De L'utilisateur

Operation
 Do not shift into reverse while traveling
at planing speeds. Loss of control, boat
swamping, or damage to the boat could
occur.
The boat is not equipped with a separate
braking system. Water resistance stops it af-
ter the throttle lever is moved back to idle.
The stopping distance varies depending on
gross weight, water surface conditions, and
wind direction.
EMU27822

Stopping engine

Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating
at high speed is not recommended.
EMU43432

Procedure

1. Push and hold the engine stop button
until the engine comes to a complete
stop.
2. Disconnect the fuel hose from the fuel
joint on the outboard motor.
46
3. Disconnect the fuel hose from the fuel
joint on the fuel tank.
2
1. Fuel joint
2. Fuel hose
4. Tighten the air vent screw by turning it
clockwise.
ZMU07806
1. Air vent screw
ZMU07906
1
ZMU07443
1
ZMU07444