Connecting The Unit To External Devices (Smartphones, Tablets And Computers) By Wi-Fi (Via Router Mode) - Teac Tascam DR-44WL Mode D'emploi

8 Connecting the DR-44WL to a
smart phone or tablet via Wi-Fi
(from second time onward)
When you establish a connection between the
DR-44WL and your smart phone for the first time and
need to connect them again, you only need to select
the SSID from the second time onward.
Press the Wi-Fi button of the DR-44WL; the
1.
Wi-Fi indicator will start to flash.
A CONNECT TO THE NEW DEVICE ? pop-up
message appears on the display to determine
whether or not the connection is new.
Your smart phone already made a peer-to-peer
2.
connection; simply press the 8/HOME button.
Pop-up message on the display disappears and
3.
the DR-44WL switches to a standby mode to
connect to your smart phone.
In your device, select "Settings" w "Wi-Fi".
4.
When Wi-Fi is enabled on for your device, it will
5.
display the SSID list of Wi-Fi equipment. Select
the SSID displayed on the DR-44WL.
Wi-Fi connection is established between the
6.
DR-44WL and your smart phone, and the Wi-Fi
indicator of the unit will light.
NOTE
The above description on operating the
device are for reference only. Please refer to
your smart phone's operation manual for
more details.
Connecting the unit to external
devices (smartphones, tablets
and computers) by Wi-Fi (VIA
ROUTER mode)
8 Setting the Wi-Fi mode to VIA
ROUTER
Press the MENU button to open the MENU
1.
screen.
Using the wheel, select (highlight) TOOLS and
2.
press the ENTER/MARK or / button.
TOOLS screen appears.
Use the wheel to select Wi-Fi and press the
3.
ENTER/MARK button.
Exec appears selected for the Wi-Fi item.
Press the ENTER/MARK button to open the
4.
Wi-Fi screen.
Use the wheel to select MODE and press the
5.
ENTER/MARK button.
Use the wheel to set the Wi-Fi mode to VIA
6.
ROUTER, and press the ENTER/MARK button to
confirm it.
Options: TO DEVICE (default value), VIA
ROUTER
8 Connecting the unit to an external
router
When the Wi-Fi screen is open, use the wheel
1.
to select the LIST item, and press the ENTER/
MARK or / button.
Exec appears selected for the LIST item.
Press the ENTER/MARK button to open the
2.
SSID LIST screen.
From the list shown on the SSID LIST screen,
3.
use the wheel to select the router you want to
connect, and press the ENTER/MARK button
to set it.
The selected SSID will be shown for the SSID
4.
item.
NOTE
The SSID can also be input directly using the
Wi-Fi screen SSID item.
To do this, at the SSID item, use the . and
/ buttons to move the cursor, and use the
wheel to set the characters.
Press the ENTER/MARK button to confirm
the SSID.
When the Wi-Fi screen is open, use the wheel
5.
to select the PASSWD item, and press the
ENTER/MARK or / button.
At the PASSWD item, use the . and /
6.
buttons to move the cursor, and use the wheel
to set the router password (encryption key).
Press the ENTER/MARK button to confirm the
router password (encryption key).
The following message appears when
•
connection with the router has succeeded.
The Wi-Fi indicator on the unit lights.
The following message appears if
•
connection with the router fails. Input the
correct password.
NOTE
• In many cases, the router password
(encryption key) is on a label on the router
itself or in its operation manual, for example.
• After connection with a router has succeeded
once, reconnection will be possible by just
pressing the Wi-Fi button on this unit.
Passwords for the two most recent connec-
tions are stored in this unit.
8 Connecting a smartphone or other
device to an external router
Select "Settings" w "Wi-Fi" on the device.
1.
iOS device example Android device example
When the device Wi-Fi is turned on, a Wi-Fi
2.
device SSID list will appear. Select the SSID of
the external router to use.
TASCAM DR-44WL
11