Getting To Know The Machine; Description Of The Machine And Planned - Stiga ST 4851 AE Manuel D'utilisation

• Avoid being a disturbance
to the neighbourhood.
• Adhere strictly to the local
regulations governing the
disposal of packaging, oil,
fuel, filters, damaged parts
or any other element which
may have an impact on the
environment; this waste should
not be disposed of along with
standard household waste,
but must be disposed of
separately and sent to special
waste disposal facilities for
handling and recycling.
• When the machine is
withdrawn from service, do not
dump it in the environment,
but take it to a waste disposal
facility in accordance with the
local regulations in force.
2.6 RECYCLING
Do not throw electrical
equipment away with
domestic waste. According to
the European Directive 2012/19/
EC on electrical and electronic
equipment waste and its
implementation in compliance
with national standards, old
electrical equipment must be
collected separately, for eco-
compatible recycling. If electrical
equipment is disposed of in
a landfill or in the ground, the
harmful substances can reach
the aquifer and enter the food
chain, damaging your health
and wellbeing. For further
information on disposing of this
product, contact the competent
authority for the disposal of
domestic waste or your dealer.
At the end of their working
life, dispose of batteries
paying due attention to the
environment. Batteries
contain material classified as
hazardous for you and the
environment. They must be
removed and disposed of
separately at a facility that
accepts lithium-ion batteries.
Separate waste collection
of the products and
packaging used allows the
materials to be recycled and
reused. Reuse of recycled
materials help to prevent
environmental pollution and
reduces the demand for raw
materials.

3. GETTING TO KNOW THE MACHINE

3.1 DESCRIPTION OF THE MACHINE
AND PLANNED USE
This machine is a snow thrower.
The machine is electrically powered. It is
equipped with a 48V / 80V rechargeable
battery pack. It should be recharged with a
230 V c.a. current socket using a specific
battery charger (see the specific manual).
The electrical motor is activated by a starter lever
on the handle, activating the clearing auger. The
operator can drive the machine by holding it by
the handle where the starter lever is located,
always standing upright behind the machine.
3.1.1 Intended use
This machine has been designed and built to
remove and clear away snow from pavements,
gardens, drives and other ground-level surfaces.
The snow thrower must only be
used to remove snow.
3.1.2 Improper use
Any other usage not in keeping with the above-
mentioned ones may be hazardous and harm
persons and/or damage things. Examples of
improper use may include, but are not limited to:
EN - 5