Initial Settings - JVC KW-NX7000 Manuel D'instructions

Initial settings

Installation settings
When you turn on the unit for the first time, the initial
setup screen appears. Follow the procedure below and
make the necessary settings.
Indication language:
In this manual, English indications are used for
the purpose of explanation. You can select the
indication language.
~
Turn on the power.
Ÿ
Select the language you want for the
display and the voice guidance.
The power is turned off then turned on
automatically so that your setting takes effect.
!
Normally select [Start Installation Settings].
• If you select [Skip Installation Settings
(for store display)], the System starts in the
navigation demonstration mode for stores
(☞ page 53).
You need to make the settings you turn on the
power next time.
7
Continued on the next page
INTRODUCTION