2.6.6 Service / Maintenance / Repair; Explanation Of The Pictograms On The Wall Chaser - Baier Elektrowerkzeuge BMF 501 Mode D'emploi

2.6.6 Service / Maintenance / Repair

•
If the power tool is dropped or becomes wet,
have it checked.
A possibly damaged power tool is dangerous
and no longer safe to operate. Before using the
power tool again, have it checked by our cus-
tomer service or an authorised service centre of
Maschinenfabrik OTTO BAIER GmbH.
•
Repair and maintenance work may only be
carried out by an authorised workshop of
Maschinenfabrik OTTO BAIER GmbH.
Otherwise, all liability and warranty claims
against Maschinenfabrik OTTO BAIER GmbH
expire.
•
Ensure that original BAIER spare parts and
original BAIER accessories only are used
when needed.
Original parts are available from authorised
dealers. Use of non original parts can cause
damage to the machine and an increased risk of
accidents.
•
Regular servicing by Maschinenfabrik OTTO
BAIER GmbH or a servicing and repair com­
pany authorised by us is specified.
Many accidents are caused by poorly serviced
and maintained power tools.
2.6.7 Explanation of the pictograms
on the wall chaser
The CE mark on a product means that the
product conforms with all the applicable
European regulations and has been sub-
jected to the prescribed conformity as-
sessment procedures.
Protection class II equipment
The machine is insulated in such a way
that it has no exposed metal parts that
could be live in the event of a fault. It does
not have a protective earth conductor.
Wait for the cutter to come to a com­
plete standstill, before putting down
the wall chaser.
Environmentally friendly disposal of
waste equipment
Waste equipment contains valuable
recyclable materials which should be re-
used or recycled. Batteries, lubricants and
similar materials must not be allowed to
get into the environment.
Therefore, please dispose of waste equip-
ment through suitable collection systems.
Wear hearing protection!
The typical A-weighted sound pressure
level of this power tool is over 85 dB (A) –
wear ear protectors when working with
the tool!
Wear hard protection!
| 25 |