Publicité
Les langues disponibles
Les langues disponibles
3. REINIGUNG UND WARTUNG
a)
Verwenden Sie zur Reinigung der Oberfläche
ausschließlich Mittel ohne ätzende Inhaltsstoffe.
b)
Bewahren Sie das Gerät an einem trockenen, kühlen,
vor Feuchtigkeit und direkter Sonneneinstrahlung
geschütztem Ort auf.
c)
In Hinblick auf technische Effizienz und zur
Vorbeugung vor Schäden sollte das Gerät regelmäßig
überprüft werden.
d)
Zum Reinigen ist ein weicher, feuchter Lappen zu
verwenden.
e)
Zum Reinigen darf man keine scharfen und/
oder Metallgegenstände (z.B. Drahtbürste oder
Metallspachtel) benutzen, weil diese die Oberfläche
des Materials, aus dem das Gerät hergestellt ist,
beschädigen können.
DE
09.11.2021
4
U S E R M A N U A L
TECHNICAL DATA
Parameter description
Parameter value
Product name
WELDING CART
Model
SWG-WC-5
Dimensions [mm]
700x425x735
Upper shelf dimensions [mm]
270x448
Middle shelf dimensions [mm]
275x385
Bottom shelf dimensions [mm]
285x435
Bottle shelf dimensions [mm]
285x250
Weight [kg]
12,5
Maximum load [kg]
80
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed and
manufactured in accordance with strict technical guidelines,
using state-of-the-art technologies and components.
Additionally, it is produced in compliance with the most
stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual product.
The original operation manual is written in German. Other
language versions are translations from the German.
2. SAGE SAFETY
The terms "device" or "product" are used in the warnings
and instructions to refer to WELDING CART.
a)
Do not exceed the maximum load.
b)
In case of any element damage or destruction, stop
using the unit.
c)
If this device is used together with another
equipment, the remaining instructions for use shall
also be followed
d)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
ASSEMBLING THE APPLIANCE
NR
ELEMENTS OF THE SET
QUANTITY
1
Bottom shelf
1
2
Wheel
2
3
Rotary wheel
2
4
Vertical panel
1
09.11.2021
EN
5
Middle shelf
6
Upper shelf
7
Side panel
8
Side brackets
9
Axis
10
Screw, washer, nut
18
11
Washer, pin
12
Plastic cap
13
Chain
ATTENTION! This product's exploded view can be
found on the last pages of the operating instructions
(pp. 11).
1.
Put the wheel(2) on the axis(9), install the washer and
pin(11). Secure the end of the axis with the plastic
cap(12). Repeat on the other side.
2.
Using screws, washers and nuts(10) fix both rotary
wheels(3) to the bottom shelf(1).
3.
Screw the side panels(7) to the bottom shelf(1) using
screws, washers and nuts(10).
4.
Use screws, washers and nuts(10) to fix the middle
shelf(5) and the upper shelf(6).
5.
Use screws, washers and nuts(10) to fix the side
brackets(8).
6.
Use screws, washers and nuts(10) to fix the vertical
panel(4).
7.
Insert the chains(13) into the holes in the vertical
panel(4) and secure by moving one of the rings
downwards as shown in the figure below:
13
3. CLEANING AND MAINTENANCE
a)
Use only non-corrosive cleaners to clean the surface.
b)
Store the unit in a dry, cool place, free from moisture
and direct exposure to sunlight.
c)
The device must be regularly inspected to check its
technical efficiency and spot any damage.
d)
Use a soft, damp cloth for cleaning.
e)
Do not use sharp and/or metal objects for cleaning
(e.g. a wire brush or a metal spatula) because they
may damage the surface material of the appliance.
5
1
1
2
2
1
2
2
2
Publicité
