Oreck Task Vac CK93010 Manuel De L'utilisateur page 12

Keep The TaskVac
LUBRICATION: The motor and brushroll are equipped with bearings which contain sufficient
lubrication for their lifetime. The addition of lubricant could cause damage. Do not add lubricant to
motor or brushroll.
1
Remove screws to the
brushroll cover.
4
Clean any debris from
the brushroll.
WARNING
CAUTION
12
Running Properly: Brushroll
™
2
Remove the brushroll
cover.
5
Return brushroll under
the belt.
TO REDUCE THE RISK OF PERSONAL INJURY: REMOVE BATTERY PACK BEFORE CLEANING OR SERVICING.
BRUSHROLL MAY SUDDENLY RESTART IF BATTERY IS IN PLACE.
DO NOT USE A SOLVENT-BASED DETERGENT WHILE CLEANING BRUSH ASSEMBLY.
3
Slide the brushroll out
of the belt.
6
Replace brushroll cover
and screw back in.