Breville the Quick Touch Compact BMO625 Manuel D'instructions page 16

Setting The Clock - 24 Hour Clock Display
The default time is 1:00. The highlighted digits
flash to show it can be adjusted.
Turn the TIME dial to adjust the hours and
Press START button to confirm.
Minutes now flash to show they can be
adjusted. Turn TIME dial to adjust minutes
and press START button to confirm.
The standby screen is now the clock screen
with the 24hr time.
NOTE
To show the clock before standby mode is
activated, press and hold STOP/CLEAR for
2 seconds.
16
SETTING THE BEEP VOLUME
Press BEEP VOL on shortcuts panel.
The default beep volume is LOW.
Turn POWER dial to toggle between LOW,
MEDIUM and HIGH beep volume. Each
position will sound the BEEP VOL selected.
Press START button to confirm.
NOTE
If you forget to press START to confirm BEEP
VOL, the volume level will default to your
selected setting after 1 minute.