6�2 Receiver; Settings; 7�1 Settings On The Sensor; 7�1�1 The Sensor Is To Switch When The Object Is Detected - Autosen IO-Link AL007 Notice D'utilisation

All manuals and user guides at all-guides.com

7 Settings

7.1 Settings on the sensor
7.1.1 The sensor is to switch when the object is detected
► Position object (Fig� 1)�
► Press [OUT ON] for > 2 s�
> The yellow LED flashes�
> The setting of the sensitivity with object is made by releasing [OUT ON]�
► Remove object (Fig� 2)�
► Press [OUT OFF]�
> The setting of the sensitivity without object is made by releasing [OUT OFF]�
> The yellow LED goes out� Programming is completed�
Fig� 1
1
Fig� 2
1
1: Transmitter
2: Receiver
2
2
19
UK