Gardena C 1030 plus Mode D'emploi page 4

Display
8 6
D
A
5
9 B C
3 Bars 2 Bars
Battery full Battery half full
Valve opens. Valve opens.
The Water Computer The Water Computer
is guaranteed to is guaranteed to
work for at least work for a minimum
½
year yet. of 4 more weeks.
4
You can change the display level at any time, even during pro-
gramming. All the programme data which have been confirmed
up to that point with the OK key are stored.
Display
5
Weekdays
(Mo), (Tu), ...
6
Time
7
am / pm
7
0
8
Start Prog
9
Run Time
0
8h, 12h, 24h,
2nd, 3rd, 7th
A
ON OFF
Prog /
B
Automatic
mode sensor
C
Sensor
ON / OFF
D
Battery
1 Bar
Battery low
Valve opens.
The Water Computer The Water Computer
will continue to work
for no more than
4 weeks.
It is advisable to
change the battery.
If no bars are displayed, the valve is no longer opened. A valve
opened by the programme will also close again if the battery
is flat. The battery display is reset when the battery is changed.
v Replace battery (see 4. Putting Your Water Computer into
Operation "Inserting battery" ).
Description
Current weekday or programmed
watering days.
Current time of day (flashes when in
input mode).
Display for 12 hour clock (e. g. in USA,
Canada).
Watering start time (flashes when in
input mode).
Watering duration (flashes when in input
mode).
Watering cycle (with drop symbol
activated). Every 8 / 12 / 24 hours;
every 2nd / 3rd / 7th day.
Watering programme on (
Watering is controlled automatically via
the sensor.
Dry sensor ON : watering is carried out.
Wet sensor OFF : watering is not carried
out.
Indicates 5 battery levels :
1 Bar flashing
Battery almost flat
Valve still opens.
stops working soon.
The battery must be
changed soon.
ON OFF
) / off ( ).
0 Bar
Battery flat
Valve does not open.
The Water Computer
stops working.
The battery must be
changed.