Whale SH2201 Instructions D'installation Et D'utilisation page 14

Fig. 25 Insert Control Panel
Step 11 Electrical Connections 12V d.c.
Vehicle Manufacturer Installation - Part Number: SH2211B
WARNING: Always disconnect the appliance from the power supply prior to working on electrical components.
The Space Heater and Control Panel come complete with electrical connectors fitted.
The Whale® Space Heater and Control Panel are designed to be integrated into the caravan's wiring loom.
The Space Heater is provided with a JST VL series 12 way socket, and the Control Panel with JST VL 6 and 3 way
sockets.
9 wires are required to connect the Space Heater to the Control Panel. The 12V d.c. and 0V d.c. power supply are to
be connected to the 12 way socket at the Space Heater.
Please note: Whale recommends that a 5 amp automotive fuse is fitted in the 12V d.c. supply.
Connector
6 Way
connector
Fig. 26 Secure Control Panel
Table 1: Connections at Space Heater
Terminal Number
1
2 0V to Switch panel
3
7
8
9
10
11
Table 2: Connections at Control Panel
Terminal Number
1
2
3
4
5
6
Description
Switch common
Fan Switch
Burner Switch
Burner LED
Lockout LED
12V supply
0V supply
Description
Switch common
Burner Switch
Fan Switch
0V to Switch panel
Burner LED
Lockout LED
14
Fig. 27 Installed Control Panel
Wire Colour
Brown
Black
Yellow
Blue
Orange
Violet
Red
White
Wire Colour
Brown
Blue
Yellow
Black
Orange
Violet