Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1.
BELT GUARD ASSEMBLY – Covers pulleys and belt during operation.
2.
BELT TENSION LOCK HANDLE – Tightens motor support and belt tenions handle to maintain
correct belt distance and tension.
3.
BELT TENSION HANDLE – Turn handle anti-clockwise to apply tension to the belt, turn it clockwise
to release belt tension.
4.
HEAD LOCKS – Lock the head to the column. Always have them locked in place during use.
5.
FEED HANDLE – It must be used to move the quill up and down. One or two may be removed if
necessary whenever the workpiece is of such unusual shape that it interferes with the handles.
6.
COLUMN COLLAR – Holds the rack to the column. Rack remains movable in collar to permit table
support movements.
7.
TABLE SUPPORT – Rides on column to support movements.
8.
TABLE CRANK – Turn it clockwise to elevate table. Support lock must be released before using
crank.
9.
RACK – Combines with gear mechanism to provide easy elevation of table by hand operated table
crank.
10.
BASE – Supports drill press. For additional stability, holes are provided in the base to bolt it to the
floor.
11.
COLUMN SUPPORT – Support column, guides rack and provides mounting holes for column to
base.
12.
COLUMN – Connects head, table and base on a one piece tube for easy alignement and
movement.
13.
TABLE – Provides working surface to support workpiece.
14.
DEPTH SCALE – Shows depth of hole being drilled.
15.
DEPTH SCALE INDICATOR – Indicates drilling depth selected on depth scale.
16.
DEPTH SCALE LOCK – Locks the depth scale to selected depth.
17.
SPRING CAP – Provides means to adjust quill spring tension.
18.
CHUCK – Holds drill bit or other recommended accessories to perform desired operations.
19.
ARM – Extends beyond table support for mounting and alinging the table.
20.
TABLE BEVEL LOCK – Locks the table in any position from 0 to 45°.
21.
TABLE LOCK – Table can be rotated in various positions and locked.
22.
BEVEL SCALE – Shows the degree table is tilted for bevel operations. Scale is mounted on top of
arm.
23.
SUPPORT LOCK – Tighten and locks table support to column. Always have it locked in place while
operating with the drill press.
24.
CHUCK KEY – It is a self-ejecting chuck key which will pop out of the chuck when you let go of it.
This action has been designedto prevent throwing of the chuck key from the chuck when power is
turned « ON ». Do not use any other key as a substitute, order a new one if damaged or lost.
25.
FEED SPRING ADJUSTMENT – Refere to par. « Assembly of the belt ».
26.
FEED SPRING – Refere to par. « Assembly of the belt ».
27.
DRILL ON-OFF SWITCH – Has locking feature. This feature is intentended to prevent unauthorized
and possible hazardous use by children and others.
29. DRILLING SPEED CHART – Drilling speed can be changed by placing the belt in any of the grooves
in the pulleys. See spindle speed label inside belt guard to approximately determine drilling speed.
34
Publicité
Chapitres
Table des Matières
