Fox F12-943A Manuel D'instructions page 23

19. Keep the tools in perfect conditions. Keep the tools sharp and clean to obtain better and safer
results. Follow the instructions to grease and change the accessories. Check regularly the electric
cable and change it if it is damaged. Keep the handles and the handgrips dry, clean, unoiled and
ungreased.
20. Disconnect the tool from electricity if you do not use it, before maintenance and change of the
accessories or tools such as blades, drills, mills, etc.
21. Remove locking and adjustment wrenches from the workbench. Get used to check if the locking and
adjustment wrenches have been removed before starting it.
22. Check the parts of the tool to verify that there are not any damages. Before using the machine,
check if the safety devices or any other parts are damaged in order to be sure that it works properly
and that it can accomplish the tasks for which it has been designed. Check that the moving parts are
aligned, do not stop and are not broken. Check the assembly and any other condition that can
influence the functioning of the machine. Any part or protection damaged must be repaired or
changed from an authorized after sales centre. Do not use the machine if the switch does not work
properly.
23. Use the machine, the tools and accessories in the way and for the purposes mentioned i this
manual. Different uses and parts can cause possible risks for the operator.
24. Get the machine repaired by a qualified person. This electric tool is in compliance with local safety
regulations. The machine must be repaired only by qualified people who use original spareparts,
otherwise risks may arise for the operator.
23