Time And Alarm Settings - Renkforce SEL-2202C Notice D'emploi

c) Time and alarm settings
"Radio" mode must be deactivated to set the time and the alarm
time (you can set 2 alarm times, AL1 and AL2).
Setting the time and the alarm
Press the button "TIME/ADJ" (2) to call up the time setup mode. Press the button
"TIME/ADJ" (2) twice to call up the alarm setup mode 1 (AL1). Press the button
"TIME/ADJ" (2) three times to call up the alarm setup mode 2 (AL2).
During these setup modes, use the buttons "AL1/HOUR" (3) or "AL2/MIN" (4) to set
the desired hour and/or minute.
Alarm time 1 (AL1) set wakeup with radio or alarm
While radio mode is deactivated, press the button "AL1/HOUR" (3) once to activate
wakeup via alarm (an alarm clock icon is shown on the display (14)).
While radio mode is deactivated, press the button "AL1/HOUR" (3) once to activate
wakeup via alarm (an alarm clock icon is shown on the display (14)).
Press the button "AL1/HOUR" (3) again to deactivate alarm time 1 (AL1).
Alarm time 2 (AL2) set wakeup with radio or alarm
While radio mode is deactivated, press the button "AL2/HOUR" (4) once to activate
wakeup via alarm (an alarm clock icon is shown on the display (14)).
While radio mode is deactivated, press the button "AL2/HOUR" (4) once to activate
wakeup via alarm (an alarm clock icon is shown on the display (14)).
Press the button "AL2/HOUR" (4) again to deactivate alarm time 2 (AL2).
Deactivate activated alarm
To deactivate an activated alarm, press the button "AL1/HOUR" (3) or the button
"AL2/HOUR" (4).
30