Timer" Mode; Setting The Weekday; Setting The Colour Of The Display Illumination; Setting The Temperature (°C Or °F) - Renkforce SEL-2202C Notice D'emploi

Turning off the alarm signal & "SNOOZE" function
If you terminate an active alarm by pressing the button "SNOOZE" (6), the wakeup
signal (alarm sound or radio) is interrupted and sounds again automatically after 8
minutes.
d) "TIMER" mode
The clock radio has an integrated timer. When activated, the set timer signal sounds
(options: 10, 20, 30, 40, 50, 60, 70, 80 or 90 minutes).
While "Radio" mode is deactivated, press the button "TIMER" (10) to call up
"TIMER" mode. Press the button "TIMER" (10) several times to set the desired time
in minutes. The timer time can be set in 10-minute steps from 90 to 10 minutes. If
you press the button "TIMER" (10) while the display (14) shows 10 (=10 minutes),
"TIMER" mode is deactivated.
If "TIMER" mode is activated, the display (14) shows "TIMER".
e) Setting the weekday
While "Radio" mode is deactivated, press the button "AM/FM BAND/WEEK" (7) seve-
ral times to set the desired weekday (shown on the display with English abbreviation).
f) Setting the colour of the display illumination
Press the button "LIGHT ON/OFF" several times to define the colour of the display's
background illumination or a constant colour change.
g) Setting the temperature (°C or °F)
Press the "°C/°F" button (8) to set the temperature display format (°C or °F).
31