Whittier Wood Products Hamilton 282Wb Instructions De Montage page 2

282Wb Hamilton Hope Chest — Parts List
BEFORE BEGINNING ASSEMBLY:
Check that the quantities of the parts received match those on the parts list below.
DO NOT FINISH CEDAR SIDE OF BOTTOM IF
CEDAR AROMA IS DESIRED.
NE FINISSEZ PAS LE CÔTÉ OU LE FOND
EN CÈDRE SI VOUS DÉSIREZ AVOIR UNE
SENTEUR DE CÈDRE.
NO BARNICE EL FONDO SI DESEA
CONSERVAR EL AROMA A CEDRO.
E — Bottom — Qty. 1
A — Top — Qty. 1
F — Base — Qty. 1
G — Top Support — Qty. 3
(attached)
B — Front Panel — Qty. 1
H — Bottom Support — Qty. 2
I — Cam Connector — Qty. 10
J — Cam Housing
K — #8 x 1¼" Black
— Qty. 10
Screw — Qty. 8
Rb — Right Side Cb — Left Side
— Qty. 1 — Qty. 1
L — #8 x 1 5 / " Black
8
M — #6 x 3/4" Brass Flat
Screw — Qty. 9
Head Screw — Qty. 24
(inserted)
O — Lid Support — Qty. 2
N — Hinge — Qty. 3
Db — Back — Qty. 1
Q — #8 x 2¾" Black
Screw — Qty. 3
P — Bumper — Qty. 4
Page 2 — 282Wb — Rev. 6/07