Multilevel Passwords - CHART BioMedical MVE Vario Pro Guide De Référence Rapide

MVE Biological Systems
TM

6.3 Multilevel Passwords

1. From the home screen, press SETUP to enter setup menus. If Password Entry
Mode is enable, the controller will prompt for a password. Use the
scroll to the appropriate number and press ENTER to advance the cursor to the
next position.
Note: The default user password is 3 4 5 6.
2. After entering password, press SETUP to scroll through the menu items. When
the Password Menus screen appears, press ENTER.
3. The controller will prompt for a password. Use the
appropriate number and press ENTER to advance the cursor to the next position.
4. Press SETUP to scroll to the Change Password 1 display and press ENTER.
▲/▼
5. Use the keys to scroll to the desired number and press ENTER to advance
the cursor to the next position. When complete, press ENTER to save
6. At the Password 1 Level display, use the
level for password 1.
7. At the Confirm New Password? display, use the
to confirm, or NO to cancel. Press ENTER to save.
Level 1
- Fog Clear
- End Clear
- Alarm Mute
- Change Display Units
PN 14910831 Rev A
▲/▼
keys to select the desired access
▲/▼
Security Access Levels
Level 2
Level 1 + :
- Temp Settings
- Time & Date Settings
- Calibration Menus
- Language Selection
- Hot Gas Bypass Menus
MVE Variō™ Pro Quick Start Guide
▲/▼
keys to
▲/▼
keys to scroll to the
keys to select either YES
Level 3
Level 2 + :
- Communications Settings
- Programming
Higher User Level
▲/▼
Required use to
ENTER Password
0000
Press ENTER for
Password menus
or press SETUP for
next menu
Higher User Level
▲/▼
Required use to
ENTER Password
0000
Press ENTER to
Change password 1
Password or press SETUP
for next menu
Password 1 level
▲/▼
Use to adjust
Press ENTER for next
XXXX
Password 1 level
▲/▼
Use to adjust
Press ENTER for next
XXXX
Confirm new
Password?
NO
▲/▼
Use to adjust
Level 4
Level 3 + :
- Password Settings
Page 11