Axis 225FD Guide D'installation page 3

Dome Casing Installation Guide
Dome casing
Tamper-proof
screws (3)
Hook for safety cord
Package contents
• Dome casing with clear/smoke-colored plastic dome
• Dome Casing Installation Guide (this document)
• 1 Allen key
Follow these instructions to replace the dome casing:
1. Remove the existing dome casing by removing the 3 tamper-proof screws using the
supplied allen key.
2. Remove the safety cord from the hook on the unit casing.
3. Attach the safety cord from the new dome casing to the hook.
4. Rotate the black protective shield inside the dome to match the camera's position.
5. Fit the dome casing onto the unit casing and secure into place by tightening the tamper-
proof screws using the allen key.
6. Use a soft, lint-free cloth to remove fingerprints and to wipe the plastic dome clean.
Safety cord
Unit casing