Publicité
4: FRONT
[1]
1: BOX-END COMBINATION
WRENCH (14 mm)
1: VEHICLE HARNESS (2-P)
4: FRONT
2: TAPING (CUT OUT)
3: COMPRESSOR
4: FRONT
3: VEHICLE CLAMP
3: ALTERNATOR
[2]
2: HEXAGONAL
WRENCH (5 mm)
1: VEHICLE HARNESS (2-P)
2: COMPRESSOR
(g) Remove an hexagonal wrench (5 mm) from the
anchoring hole.
A029108
(h) Pull the vehicle harness.
A029109
(i)
Connect the vehicle harness to the compressor.
(j)
Connect the vehicle clamp to the compressor.
A029110
- 81 -
00503438E
Publicité
