Publicité
4: FRONT
[1]
1: BOX-END COMBINATION
WRENCH (14 mm)
3: CORRUGATED BOARD
4: FRONT
2: RADIATOR
3: FRONT
1: CONDENSER
3: ALTERNATOR
[2]
2: HEXAGONAL
WRENCH (5 mm)
A029108
2: RADIATOR
1: CONDENSER
A029096
A029097
00503438E
(u) Remove an hexagonal wrench (5 mm) from the
anchoring hole.
(2) CONDENSER
(a) Insert the condenser in front of the radiator.
CAUTION
Insert a corrugated board and others before
inserting the condenser to prevent the radiator from
being damaged.
(b) Install the condenser to the radiator.
NOTE
Insert the resin bracket at the lower side of
condenser into the lower side of the radiator, and
then insert the resin bracket at the upper side of
condenser into the upper side of radiator.
- 73 -
Publicité
