Publicité
2: CLOTH TAPE
2. INSTALLATION INSIDE
1. Before starting installation, remove the negative
2. Before making any hoses and tubes
3. When tightening and loosening the fittings, use
4. Ensure fender covers are in position.
5. Start the work from the inside passenger
(1) REMOVAL OF ORIGINAL PARTS
2: CLOTH TAPE
1. Attach the cloth tape as shown, before
2. For the removal steps of clamp, remove the lock
1: FRONT
BUMPER
A009767
- 61 -
00503438E
ENGINE COMPARTMENT
CAUTION
terminal of the battery.
connections, apply a few drops of compressor
oil to the seat of O-ring and coupling nuts.
two wrenches for support.
compartment side.
(a) Front bumper
CAUTION
removing the front bumper.
portion first before removing the clamp.
Publicité
