Removing/Assembling The Refrigerator Door Handles; Removing/Assembling The Freezer Drawer Handle - LG LMX21986 Serie Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

12
INSTALLATION
Removing/Assembling the
Refrigerator Door Handles
NOTE
Removing the doors is always recommended when it
is necessary to move the refrigerator through a nar-
row opening. If it is necessary to remove the handles,
follow the directions below.
Removing the Handles
1
Loosen the set screws with a
remove the handle.
2
Loosen the mounting fasteners that connect to the
refrigerator door and handle using a
remove the mounting fasteners.
Mounting
Fasteners
Set Screw
Allen
Wrench
Assembling the Handles
1
Assemble the mounting fasteners at both ends of the
1
handle using a
/
in. Allen wrench.
4
2
Place the handle on the door by fitting the handle foot-
prints over the mounting fasteners and tightening the set
3
screws with a
/
in. Allen wrench.
32
Mounting
Fasteners
3
/
in. Allen wrench and
32
1
/
in. Allen wrench,
4
Removing/Assembling the
Freezer Drawer Handle
Removing the Handles
1
Loosen the set screws located on the lower side of the
1
handle with a
/
in. Allen wrench and remove the handle.
8
2
Loosen the mounting fasteners that connect to the
freezer drawer and handle using a
and remove the mounting fasteners.
Assembling the Handles
1
Assemble the mounting fasteners at both ends of the
1
handle using a
/
in. Allen wrench.
4
2
Place the handle on the door by fitting the handle foot-
prints over the mounting fasteners and tightening the set
1
screws with a
/
in. Allen wrench.
8
WARNING
When the customer takes apart the handle or assemble it
from a refrigerator, please be cautious of following things.
Hold the handle with your own hand to make sure not
to drop the handle to the floor or instep while taking
apart the handle from a refrigerator.
Do not swing the handle towards people or animals
after taking apart the handle.
Insert the bracket hole of the handle into the stopper
bolt of the door exactly, and then assemble the set
screws to fix the handle.
Check if there's any gap between the door and handle
after fixing the handle.
1
/
in. Allen wrench,
4

Publicité

Table des Matières
loading

Table des Matières