Material Information - Glamox Aqua Signal 60 Serie Instructions De Service

Housing base, polycarbonate

10.9 Material Information

Housing cover, polycarbonate
Housing sealing, silicone
The standard nuts, M6, in the side of housing, are used to close
the housing cover. If these are lost during mounting, standard M6
spare nuts must be pressed into the lateral shafts.
The housing components of the navigation lights are made from
UV-resistant plastic, the top cover with cooling ribs is made of
seawater resistant aluminum.
When choosing the fastening (bolts), we recommend the use of
high-quality, stainless steel. Consider the resistance to seawater!
We recommend the use of self-locking nuts to secure the bolts.
Bolt locking adhesive is unsuitable for various reasons and must
not come into contact with the housing components.
Also consider the resistance to seawater and UV light for the ca-
ble used! Also ensure a possible resistance to brittle fracture at
low temperatures.
Page 19 of 24
Hexagon nut M6
9420119300_en Rev. 3
en
de
fr