6.3
Calling up information messages
Information messages
ƒ
–
are texts which appear because of a certain event (e.g. if an actual value
exceeds a limit),
–
can only be called up as long as the triggering event is active.
–
must have been programmed in the HMI Designer" planning tool.
–
can have a maximum length of 2 lines × 20 characters.
The second to last line contains a programmable message field. This field
ƒ
indicates the numerical size of the variable that has activated the
message.
The LED in the
ƒ
If you want to ...
A
call up an information message.
Information messages called up for the first
l
time are marked by **.
B
select the previous or next information
message.
C
close the information message.
6.4
Calling up help messages
Help messages
ƒ
–
can be assigned to pages or information messages.
–
contain useful notes to make handling easier.
–
must have been programmed in the HMI Designer" planning tool.
The LED in the
ƒ
If you want to ...
A
call up a help message.
B
close a help message.
EDBPM−H315 DE/EN/FR 6.0
Calling up information messages
Info
key will flash if an information message is available.
Press keys ...
Info
PgUp
Clr
Esc
Help
key will flash if a help message is available.
Press keys ...
Help
Clr
Esc
l
Operation
Example
Druck uebersteigt
die Sicherheitsgrenze
125.5
or
PgDN
Wasserstand unterhalb
der Arbeitsschwelle
40
Example
6
**
67