Calling Up Information Messages - Lenze EPM-H520 Instructions De Mise En Service

Show/Hide Bookmarks
Operation
1 2 3
4 5 6
7 8 9
0
5.3

Calling up information messages

Information messages
!
– are texts which appear after a certain event (e. g. an actual value exceeds a limit).
– can only be called up as long as the triggering event is active.
– must have been programmed in the planning tool "HMI Designer".
– can be 4 lines long with a max. of 70 characters (normal character size).
The last but one line contains a programmable message field. This field shows the numerical
!
value of the variable that triggered the message.
The last line shows the date and time of the message.
!
!
Symbols and characters used in information messages
Symbols/characters used in the line for
date/time
You want to ...
A) call up an information message.
•
Max. 4 information messages can be
indicated per page.
B) select the next information.
C) close an information message.
86
indicates an information message.
"
HELP
Press keys ...
EDBEPM-H520 DE/EN/FR 4.0
Meaning
The information message has been called up for the first
time.
The information message is assigned to a help function.
( * 89 )
Example
or
ESC
Pressure exceeds
safety limit
125.5
13-09-2000 10:45a
Temperature exceeds
ESC
safety limit
1700
13-09-2000 10:55a HELP
Water level below
working threshold
-10
13-09-2000 11:00a HELP
Gas saturation in the stokehole has
reached limit value
345
13-09-2000 09:00a
Water pump stopped Water pump stopped Water pump stopped Water pump stopped Water pump stopped Water pump stopped Water pump stopped
13-09-2000 10:45a 13-09-2000 10:45a 13-09-2000 10:45a 13-09-2000 10:45a 13-09-2000 10:45a 13-09-2000 10:45a 13-09-2000 10:45a
ESC ESC ESC ESC ESC ESC ESC
L