Composition Of The Machine; Prearrangements At Purchaserʼs Charge; Emergency Operations In Case Of Fire; Explosion Risk - OEM FX/201/M Mode D'emploi Et D'entretien

1.4 - COMPOSITION OF THE MACHINE

FX-RB, FXID-RBID kneading machines are the result
of a multiyear experience.
• The machine consists of a bearing structure the motor
is housed in, of a head, which controls the kneading
spiral element, of a container to contain the dough
mix.
• Depending on the concerned model, it is possible to
get a tip-up head.
• The FX-RB models are suitable for a conventional
system.
• The FXID-RBID models are suitable for hydrated
systems.
1.5 - PREARRANGEMENTS AT PURCHASERʼS
CHARGE
a) Prearrangement of the installation place.
• The purchaser shall prearrange a supporting surface
for the machine as indicated in the chapter "Installa-
tion".
b) Electric prearrangement.
• The power system should comply with the local re-
gulations and provided with an efficient earthing.
• Place an omnipolar sectioning device on the power
feed line, above the machine.
• The size of the electric power cables should
comply with the maximum current required by
the machine, so that the total voltage drop at
full charge will be less than 2%.
EN - 4
General specifications and warning
1.6 - EMERGENCY OPERATIONS IN CASE OF
FIRE
a) In case of fire turn off the power by disconnecting the
main power switch.
b) Put out the fire by means of suitable fire extinguishers.
DANGER
Do not attempt to put out the fire by using water.

1.7 - EXPLOSION RISK

• The machine is not suitable to be used in a place
with explosion risk.

1.8 - SOUND PRESSURE LEVEL

FX-RB, FXID-RBID models have been developed to
keep a continuous weighed acoustic pressure level
A(dB) lower than 70dB during the machine idling.
FX / RB/ RVE