Specifications - CertainTeed NO-COAT PRO Manuel D'instructions

Issue: Display reads "PRODUCT ERROR".
Check the following:
1. Box is loaded incorrectly.
Solution: make certain the box is loaded
correctly on the spindle arm and the box is
tight against the rear of the machine.
Make certain the lever of the product
sensor does not contact the activating
screw when product is loaded.
NO-COAT PRO SPECIFICATIONS
Dimensions: Width: 9" (230 mm)
Length: 36" (914 mm)
Height: 16" (406 mm)
Weight: Dry transport weight:
43 lb (19.5 kg)
Full weight with full hopper and full box:
160 lb (73 kg)
NO-COAT PRO Corner box weight:
17 lb (7.7 kg)
Power: 100-240 VAC, 50-60 Hz, 3.8A
Fuse: 5 x 20 mm, 6.3A, 250V, slow-blow
Activating
Screw
Box Loaded
CORRECTLY
Box tight
against
Machine
Box Loaded
INCORRECTLY
Gap
between
box and
Machine
NO-COAT PRO INSTRUCTION MANUAL
®
Product
Sensor
23