Operation; Cleaning And Maintenance - Inventum AKD8005ZWA Manuel D'utilisation

CONNECTING THE APPLIANCE
Caution:
If you wish to make a fixed connection, make sure that there is an omnipolar switch with a minimum
contact separation of 3 mm installed in the supply cable.
1. Make sure that the voltage in your home corresponds with the voltage of the appliance.
2. Use the supplied mains cable to connect the appliance to the mains socket.
5

Operation

STARTING AND STOPPING THE APPLIANCE
1. It is advised that you start the appliance a few minutes before you start cooking.
2. Touch the button 1, 2 or 3 to start the appliance. The appliance starts at the set speed.
3. Touch the same button 1, 2 or 3 again to stop the appliance.
Note:
Make sure that the appliance operates for 5 to 10 minutes after you finish cooking.
ADJUSTING THE SPEED
1. Make sure that the appliance is on speed 1.
2. Press one of the buttons 2 or 3 to increase the speed.
3. Press a lower button to decrease the speed.
USING THE BOOSTER MODE
The booster mode provides extra speed to the appliance.
1. Make sure that the appliance is on.
2. Touch the button 4.
The booster mode now works for 5 minutes. After 5 minutes, the speed returns to 3.
USING THE AUTOMATIC SWITCH-OFF MODE
In automatic switch-off mode, the appliance automatically switches off after 15 minutes.
1. Make sure that the appliance is on.
2. Adjust the speed to setting 1, 2 or 3.
3. Touch and hold the button 1, 2 or 3 for 3 seconds to activate the automatic switch-off mode. The setting flashes.
The speed flashes and the timer is activated.
USING THE LAMPS
1. Touch the lamp button to activate or deactivate the lamps.
6

Cleaning and maintenance

SAFETY INSTRUCTIONS FOR CLEANING AND MAINTENANCE
Warning:
Clean the appliance and the grease filters regularly. Failure to do so may result in fire.
32 • English