Panel Introduction - acerpure cool Serie Manuel De L'utilisateur

Panel Introduction

1
2
3
4
Smart Mode
1
When smart mode is enabled, the Smart icon on
the panel will always stay on.
Timer Mode
2
1 2
hr hr
*Under timer mode, press the off timer button
00:00:00
and display countdown screen, then press it
again to cancel timer mode.
Lock Mode
3
After lock mode is enabled, it will light up
constantly on the display panel. When
disabled, will appear and then it will no
longer be displayed on the panel.
Wi-Fi Mode
4
When the Wi-Fi function is enabled, the lights
will flash; after the smart device is successfully
connected, it will stay lit on the display panel.
Smart
4 8 12
hr hr hr
001
PM2.5
GAS
PM2.5/PM1.0 Value Display
5
The initial value displayed on the panel of this
product is PM2.5; the remote control can be
used to turn to display the PM1.0 value.
Dust Status Display
6
This product uses three color lights, green,
yellow and red to display the PM2.5/PM1.0 dust
concentration status (good, moderate, poor).
Gas Status Display
7
This product uses three color lights, green,
yellow and red to display the VOCs status
(good, moderate, poor).
9
5
6
7