Function Buttons - acerpure cool Serie Manuel De L'utilisateur

Function Buttons

Power ON/OFF
You can start or stop using this product.
*The anion function is released at the same time when the air
purifier is powered on.
*When using this product for the first time (after power is
disconnected, each time power is reconnected is considered
using for the first time), please wait for 90 seconds for the motor
and sensor to calibrate. While the motor is calibrating, this
product will swing to the left and right automatically, and the
circulation fan will swing upwards and downwards.
Wi-Fi Functions
Before product registration: Press and hold down
the power button for more than 3 seconds to
activate the Wi-Fi product registration mode.
Reset and disable: After enabling Wi-Fi, press and
hold the power button for more than 3 seconds to
reset and disable Wi-Fi.
Purifier Speed
This product has a total of four stages of purifier
speeds (Smart Mode, Low, Middle, High, and Turbo
Mode), you can adjust the purifier strength of this
product according to your needs.
*Smart Mode: The purifier speed strength (low, middle and high)
is adjusted automatically based on the air quality status (green
light, yellow light, red light).
Lock Function
Press and hold down the purifier speed button for 3
seconds to enable the lock function; press and hold it
down for 3 seconds again to cancel the lock function.
Circulator Speed
This product has 10 different speeds. You can choose
your desired speed according to you needs. When you
press it the 11th time, the air circulator will be turned
off.
3s
3s
Off Timer
You can preset the product to shutdown automatically after 1
hour, 2 hours, 4 hours,8 hours, and 12 hours.
Quiet Mode
Press and hold down the off timer button for 3 seconds to
enable sleep mode; press and hold it down for 3 seconds
again to cancel quiet mode.
*Please note that after quiet mode is enabled, the display panel of this
product will go off automatically after 15 seconds, and the touch panel
will also be in silent mode.
Up and Down Swing Mode
It allows you to set the air circulator of this product to
swing up and down; pressing it for a second time will stop
it from swinging.
Left and Right Swing Mode
It allows you to set the body of this product to swing left and
right, pressing it for a second time will stop it from swinging.
Operating Air Quality Display
The initial value displayed on the panel of this product is
PM2.5,by using this button on the remote control, it can switch
to display the PM1.0 value, and pressing it for a second time will
switch off the air quality display panel.
Turning off the Filter Replacement
Indicator
+
When the filter of this product needs to be replaced, the filter
replacement indicator of this product will light up
automatically; after replacing the filter, press and hold down
the power button, and the purifier wind speed button
simultaneously for 3 seconds to turn off the filter replacement
indicator.
8