Binzel Abicor CAT2 Mode D'emploi page 25

CAT2
1 Identification
1
1 Torch neck
2 Torch mount
Fig. 1 Overview
The CAT2 robot mount is used in industry and in the trade for connecting the
robot an the tool. The CAT2 is a three-dimensionally acting safety cut-out and
is adaptable to all types of robots and handling machines via a robot flange.
These operating instructions only describe the CAT2 robot mount. The CAT2
robot mount may only be operated using original ABICOR BINZEL spare
parts.
3 Mount
4 CAT2
2
5
1 Identification
3
4
5
Robot flange
EN - 3