Binzel Abicor CAT2 Mode D'emploi page 24

EN Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operating instructions as become necessary due to misprints, inaccuracies
or product enhancements. Such changes will, however, be incorporated into subsequent editions of
the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their
respective owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 EU Declaration of Conformity
2 Safety
2.1 Designated use
2.2 Responsibilities of the user
2.3 Personal protective
equipment (PPE)
2.4 Classification of the warnings
2.5 Warning and information signs
2.6 Emergency information
3 Product description
3.1 Technical Data
3.2 Abbreviations
3.3 Nameplate
3.4 Signs and symbols used
4 Scope of delivery
4.1 Transport
4.2 Storage
5 Functional Description
EN - 2
EN-3 6
EN-4 6.1
EN-6 6.1.1 CAT2 HL
EN-6 6.2
EN-6 6.3
6.4
EN-6
EN-7 7
EN-7
EN-7 8
EN-8 9
EN-8 9.1
EN-11
EN-11 10
EN-11
11
EN-12
EN-12 12
EN-12 12.1
12.2
EN-13 12.3
Putting into operation
Fastening the CAT2 to the
robot
Adjusting TCP
Connect the helix cable
Activating the LED function
Operation
Putting out of operation
Maintenance and cleaning EN-19
Maintenance intervals
Troubleshooting
Dismounting
Disposal
Materials
Consumables
Packaging
CAT2
EN-14
EN-14
EN-17
EN-18
EN-18
EN-18
EN-19
EN-19
EN-20
EN-21
EN-22
EN-23
EN-23
EN-23
EN-23