Nexgrill 720-0778B Manuel D'instructions page 37

Natural Gas Conversion for Model# 720-0778B
Searing Side Burner Conversion
Tools required:
The step-by-step instructions
1. Remove the screw under C bracket to take off the C bracket, then remove 4 screws at each corner of the
searing side burner and one screw for igniter.
2. Remove the searing side burner LP (Liquid Propane) orifice
(Natural Gas) orifice to the connector by hand from beneath of side burner, then replace the side burner
to the original position, tighten screws for all corners.
Phillips Head Screwdriver (+)
6 mm Nut Driver
for converting the searing side burner's orifice are below.
with the 6 mm driver, then Replace the NG
37