Assembly And Preoperation; Pw1826 - Campbell Hausfeld PW1826 Instructions D'utilisation Et Manuel De Pièces

Operating Instructions and Parts Manual

Assembly and Preoperation

AsseMBly And PreoPerAtIon
Always make sure that
the garden hose is
turned on before turning on the pressure
washer. Running the pressure washer
without water will damage the pumps seals.
Do not disassemble
the lance or gun on this
pressure washer. Replacement parts are not
available for the gun or lance.

PW1826:

1. Slide handle (1) onto unit (see Figure
7).
2. Attach with 2 phillips screws.
3. Slide hose hook (6) onto front of
pressure washer.
4. Attach with 2 phillips screws.
5. Slide soap tank (5) into handle.
6. Attach soap tube to unit (see Figure 8).
7. Attach high pressure hose to gun (see
Figure 9).
8. Attach lance to gun (see Figure 10).
9. Attach garden hose to unit (see
Figures 11 and 12).
10. Attach high pressure hose to high
pressure outlet (see Figure 13).
10
www.chpower.com
1
2
Figure 7 - PW1826
Figure 10 - Attach lance to gun.
Pump Gasket Hose Gasket
Extra Gasket
Figure 12 - garden hose gasket instructions
5
6
Figure 8 - Attach soap tube to unit
Figure 9 - Attach high pressure hose to gun
Figure 11 - Attach garden hose to unit
Figure 13 - Attach high pressure hose to
high pressure outlet
High Pressure Outlet
High Pressure Outlet