Washer; Assembly And Preoperation - Campbell Hausfeld CP5101 Instructions D'utilisation

Operating Instructions and Parts Manual

Assembly and Preoperation

AsseMbly And PreoPerAtIon
1. Slide the handle assembly over the
lower legs of the cart base. Use the
(supplied) star knob and bolts to
secure the handle to the legs (See
Figure 9).
2. Insert spray tips into rubber tip holder
(See Figure 10).
3. Brass Swivel Adaptor (see Figure
12). If it's not already attached to
the pump inlet, assemble the brass
swivel adapter and attach it to the
pump inlet (see Figure 11). Be sure to
connect the correct side of the brass
swivel adapter to the pump.
4. Secure garden hose (not included) to
the inlet connection on pump (See
Figure 11).
5. Connect the high pressure hose to the
pump outlet (See Figure 13).
6. Connect the high pressure hose to the
gun (See Figure 14).
7. Attach the lance to the gun (See
Figure 15).
8. Install quick connect tip (See
Figure 16).
Figure 14 - Attach high pressure hose to
gun
10
www.chpower.com
Figure 9 - Assemble handle
Garden Pump Inlet
Hose
Figure 11 - Pump hook up
Connect This End To
Garden Hose
Washer With
Filter Screen
Figure 12 - brass swivel adapter
Figure 15 - Attach lance to gun
Figure 10 - Insert spray tips into the holder

Washer

Connect This
End To Pump
Figure 13 - Connect high pressure hose to
pump
Figure 16 - Quick connect tip
Detergent
Hose Barb
Thermal Relief Valve
Pump
Outlet