INDIGO
Quax
First dreams
®
First steps
Step 5 : Use the parts of step 3 and 4, both supports EP4, four wood screws D and four wood screws E
Push the base (EP3) With its connector in the drillings and over the wooden dowels of the sides (EP1 LH and
EP1 RH) and tighten the eccentrics. Push the four wood screws (D) In the drillings at the bottom of the base and
tighten them in the sides. Place the supports (EP4) in front of the drillings of the base, push the four wood screws
(E) in the holes at the bottom of the supports and tighten them in the base.
24
54 03 55xx-E
Luierextensie
Wickelansatz
Plan à langer
Changing extension