Quax INDIGO 54 03 55 E Serie Manuel page 23

INDIGO
54 03 55xx-E
Step 2 : Use the back EP2, two wooden dowels A and three eccentrics C
Push the eccentrics (C) into the provided drillings on the inside of the back (EP2). Push the wooden dowels
(A) into the holes at the bottom of the back.
Step 3 : Use the base EP3, one connector B and two eccentrics C
Push the eccentrics (C) into the holes at the bottom of the base (EP3). Tighten the connector (B) in the
middle drilling at the back of the base.
Step 4 : Use the parts of step 1 and 2
Push the sides (EP1 LH and EP RH) with their connectors in the drillings of the back (EP2) and tighten the
eccentrics.
Luierextensie
Wickelansatz
Plan à langer
Changing extension
Quax Quax
First dreams First dreams
® ®
First steps First steps
23