Publicité
Les langues disponibles
Les langues disponibles
Remove the stem bolts from the upper fork
2.2.1
crown (Allen key 5 mm)
Torque the bolts exactly to the specifications
2.2.4
of the manufacturer of the stem and / or han-
dlebar (refer to the black box on the right of
this page). Make sure the gaps in the clamp
are even and that the handlebar is centered
correctly – the adjustment graphics will help
you with this.
0 8 y t
HANDLEBAR ASSEMBLY
C OMP // BASE
R A C E FAC E ATL AS / C HE S TE R D IRE C T M O UN T
Put the screws in the stem then place the
2.2.2
handlebar and the stem on the upper fork
crown.
Mount the stem on the upper fork crown
2.2.3
(5 mm Allen key). Tighten the screws in an X
pattern. Do it step by step with just one turn
per screw at a time.This is the only way to
achieve an even clamping of the bolts.
Pl ea se f ol l ow th e
torque spe cif i cat ions of
the ma nufacture rs:
RaceFace Direct Mount:
Fork crown screws //
Handlebar clamp screws//
Renthal Integra II:
Fork crown screws //
Handlebar clamp screws //
12 Nm
9 Nm
10 Nm
6 Nm
Publicité
